SHANGHAI KWONGFAT TRADING CO.,LIMITED

East China's most outstanding waterproof materials export experts

Waterproof special machine

Product Name:

Waterproof special machine

Product Description:

Using the high pressure infusion method for water plugging, plugging agents to use new technology is developed countries. End of high pressure grouting plugging agent is a kind of viscosity, one-component synthetic macromolecule polyurethane material, form for slurry, it has produced under the influence of water crosslinking reaction, foam generated multiple network closed characteristic of the elastomer.

Introduction to illustrate:

When it is high-pressure injection to the concrete structure crack extension until all the gap fill (including barely detectable to the naked eye), water (water) with crosslinking reaction, after the release of a large amount of carbon dioxide gas, produce secondary osmotic pressure, high pressure thrust and secondary osmotic pressure to press the elastomer into and filled with all the gaps, to stop leakage, it can be said in one of the best plugging material performance, it has the following features:

1, highly finished products;

2, operation is simple;

3, construction of the four seasons;

4, non-toxic pollution-free;

5, reasonable fees.

KF-999 micro high-pressure grouting machine from precision machinery and light and convenient features, eliminate the disadvantage of the elf indisposition more and to the rapid disassembling, easy for maintenance demands and design the structure of the perfusion professional model, ultra-high pressure without air pressure source and light weight, can solve the builders to carry heavy machinery for the inconvenience, is a professional water stop, build the best choice. Cannot effect a radical cure with general material leakage, the use of high pressure infusion technology after plugging success at a time.

Scope of application:

1, building and subway, tunnel and other underground engineering distortion seam, construction seam, structural fracture plugging.

2, bridge, dam, hydropower station, crack leakage, external wall reinforcement of concrete structures.

3, all kinds of water tower, pool, basement and plugging.

4, tunnel excavation, and plugging in mine construction, railway, tunnel, culvert plugging.

5, fracture zone and soft foundation reinforcement. Waterproof plugging engineering USES the "wall, note, sealing, prevent measures" and "grouting and waterproof coating" combining the advanced construction. With advanced technology, combined with with my product, keep you safe.

6, the structure of small crack, honeycomb, secondary construction joint ooze water stop leakage.

7, small crack, honeycomb structure, secondary construction mended.

8, polyurethane insulation spraying foaming agent, water seepage geological improvement. Such as subway, tunnel, continuous wall, water seepage check leakage, such as the structure basement wall at the entrance of water geological improvement.

Directions for use:

1, before the start of a drill is reverse switch is in the R position (forward).

2, electric drill to drill hammer mode operation is prohibited.

Each part of the 3, check the screw off high pressure pipe joint and switch valve, be sure to lock.

4, drill speed adjustment to the maximum, hand electric drill switch fixed start, with wire switch control operation.

5, axis and the pump has a hexagonal copper nut wrench (17), there is increasing iron dragon, this function is to prevent leakage, such as machine perfusion, here are the oil, please adjust the copper nut to appropriate level.

6, miniature high pressure grouting machine maximum instantaneous pressure in 13000 spi, perfusion pressure degree must consider water stop when the needle. Reduce the risk.

7, miniature high pressure grouting machine is in operation when using epoxy resin, please limit operation time of epoxy resin, can judge the temperature of epoxy resin, such as the temperature of epoxy resin has the sign of increase, be sure to immediately stop operation, quickly with special detergent to clean the machine, and really clean.

8, miniature high pressure grouting machine machine perfusion including particle composition of the liquid is forbidden, such as resin mortar.

9, and be sure to immediately after with special detergent cleaning machine is about 2 to 3 minutes, after the cleaning to keep cleaning agents within the placer and avoid drug residues, lead to machine.

Please wear goggles when 10, perfusion, lest medicament sprayed to the eyes.

11, it is forbidden to particles into the material inside the cup (to avoid scratch pressure pump).

The machine features

1, construction fast: in a few seconds to 0 ~ 18000 spi work pressure, perfusion time faster than other models.

2, light weight, the fuselage body weighs 7 kg, carrying energy makes it move easily.

3, simple repair: don't need special training to maintenance, mechanical repairs and shutdown.

4, continuous pressurization: agents can effectively infuse to fine seam and honeycomb, really effective fill with honeycomb structure cracks.

5, durable: the highest stress 18000 spi timing body parts not variant.

6, suitable material: Pu foam seepage of agent, epoxy resin, no granular low viscosity liquid.

Portugues

Russian

Links: